Dick Koch's convertible



Works in progress. Or, whose progress has been completed!
Post Reply
User avatar
Dick Koch
Posts: 2218
Joined: Sat Jan 21, 2006 4:03 pm
Location: Palm Beach Gardens, Fl.
Contact:

Dick Koch's convertible

Post by Dick Koch »

John & John - Both of you are to be envied for the work you are doing on your convertibles. I will be joining you soon in the same endeavor, I bought the Belvie Convertible in Jamestown, CA. and should be receiving it soon. I'm real excited even though it will need a lot of work. John Q, like yours it was out in a field for quite some time but by the pictures I have (I will try to figure out how to put them on the site) it doesn't seem to be as bad as the one I'm restoring right now was under all that paint. I will probable be picking your brains as soon as I finish my hardtop. You too Roger if you don't mind. This is the only way I would ever have been able to afford a Convertible. What with my stash of parts and my parts car I should have everthing I will need. I even have a bolt of black and white factoy correct upholstery cloth that was in the trunk of my green car when I received it. I even may be able to clone it to a Sport Fury. I also have two engines a 318 A block and a 318 La block, two torqueflight trannys and a drive shaft.

NOW as to all of youse guys belly aching about the cold weather it was 45 degrees on my back porch this morning, had to wear long pants when I took the dogs out. So I quess I will hunker down inside today and try to clean up this mess on my desk.
Dick.
1959 belvedere convertible 001.JPG
1959 belvedere convertible002.JPG
1959 belvedere convertible 003.JPG
1959 belvedere convertible 004.JPG
Life is Beautiful! Sex, Beer & Mopars.
User avatar
Dick Koch
Posts: 2218
Joined: Sat Jan 21, 2006 4:03 pm
Location: Palm Beach Gardens, Fl.
Contact:

Dick's convertible project

Post by Dick Koch »

Edit postReport this postReply with quote Dick's convertible project
by Dick Koch » Thu Jan 13, 2011 10:49 am

John & John - Both of you are to be envied for the work you are doing on your convertibles. I will be joining you soon in the same endeavor, I bought the Belvie Convertible in Jamestown, CA. and should be receiving it soon. I'm real excited even though it will need a lot of work. John Q, like yours it was out in a field for quite some time but by the pictures I have (I will try to figure out how to put them on the site) it doesn't seem to be as bad as the one I'm restoring right now was under all that paint. I will probable be picking your brains as soon as I finish my hardtop. You too Roger if you don't mind. This is the only way I would ever have been able to afford a Convertible. What with my stash of parts and my parts car I should have everthing I will need. I even have a bolt of black and white factoy correct upholstery cloth that was in the trunk of my green car when I received it. I even may be able to clone it to a Sport Fury. I also have two engines a 318 A block and a 318 La block, two torqueflight trannys and a drive shaft.

NOW as to all of youse guys belly aching about the cold weather it was 45 degrees on my back porch this morning, had to wear long pants when I took the dogs out. So I quess I will hunker down inside today and try to clean up this mess on my desk.
Dick.Attachments



Life is Beautiful! Sex, Beer & Mopars.
Dick Koch

Posts: 502
Joined: Sat Jan 21, 2006 5:03 pm
Location: Palm Beach Gardens, Fl.
Private messageE-mail Dick KochYIM Top
--------------------------------------------------------------------------------

Edit postReport this postReply with quote Re: Getting a start on the convertible project
by Dick Koch » Thu Jan 13, 2011 10:56 am

OPPS, John, didn't mean to intrude on your thread. Thought I was starting a new one. Does anybody know how to transfer this to a new thread.
Dick.Life is Beautiful! Sex, Beer & Mopars.
Dick Koch

Posts: 502
Joined: Sat Jan 21, 2006 5:03 pm
Location: Palm Beach Gardens, Fl.
Private messageE-mail Dick KochYIM Top
--------------------------------------------------------------------------------

Report this postReply with quote Re: Getting a start on the convertible project
by rogerh » Thu Jan 13, 2011 11:14 am

MISTER KOCH!
This is AWESOME news! ANOTHER convertible gets a second chance! And joins this List!
I'll keep my comments brief, since this needs to be a new thread.
Before you have it shipped east, think about what you might need from Big M..save on shipping
Last edited by rogerh on Thu Jan 13, 2011 1:35 pm, edited 1 time in total.
rogerh

Posts: 2058
Joined: Fri Mar 19, 2004 7:30 am
Location: Silverdale, Wa.
Private messageE-mail rogerh Top
--------------------------------------------------------------------------------

Report this postReply with quote Re: Getting a start on the convertible project
by big m » Thu Jan 13, 2011 1:15 pm

Congratulations on your purchase, Dick!

That convertible looks quite good, the one i had been told about near Angels camp was supposed to be quite poor, maybe this was a different car?

---JohnIn rust we trust!
big m

Posts: 416
Joined: Wed May 25, 2005 6:14 pm
Location: Northern California
Private messageE-mail big mWebsite Top
--------------------------------------------------------------------------------

Report this postReply with quote Re: Getting a start on the convertible project
by Matthew Keij » Thu Jan 13, 2011 3:01 pm

Nice car! It is in pretty good shape.

From what i can see:
No dash pad in it, std steering wheel, normal rear view mirror.
Had a normal mirror on the left side, bumper wings! (John Q can learn from that), Sport Fury medallions on it, Sport deck.

Cant wait to see more pics of itIf it ain't dutch, it ain't much
She's real fine, my 361
Matthew Keij

Posts: 580
Joined: Tue Mar 09, 2004 4:37 pm
Location: Poortvliet, The Netherlands
Private messageE-mail Matthew Keij Top
--------------------------------------------------------------------------------

Edit postDelete postReport this postReply with quote Re: Getting a start on the convertible project
by Dick Koch » Thu Jan 13, 2011 3:11 pm

Matthew - You have some pretty good eyes, I was so excited to get it I didn't even notice the Bumper wings, medallion, etc.
Dick.Life is Beautiful! Sex, Beer & Mopars.
Dick Koch
Life is Beautiful! Sex, Beer & Mopars.
User avatar
Matthew Keij
Posts: 1407
Joined: Tue Mar 09, 2004 3:37 pm
Location: Poortvliet, The Netherlands

Re: Dick's convertible project

Post by Matthew Keij »

That's why i am here Dick! I know all the options :lol:

When do you expect to have it deliverd? I really like to see more pics of it.
You are just a little bit too far for me to come and check it out
July 14th 2019 “the soul crusher”
User avatar
Dick Koch
Posts: 2218
Joined: Sat Jan 21, 2006 4:03 pm
Location: Palm Beach Gardens, Fl.
Contact:

Re: Dick's convertible project

Post by Dick Koch »

OK everbody - Here's my new thread. will have to reload the pictures and another one I found. I see some seat springs and a Grill, I have another grill here. I also have a valance from a 4 dr. Belvie Sedan but its quite different from the one on a Sport Fury.
Dick.
1959 belvedere convertible 001.JPG
1959 belvedere convertible002.JPG
1959 belvedere convertible 003.JPG
1959 belvedere convertible 004.JPG
1959 belvedere convertible 005.JPG
Life is Beautiful! Sex, Beer & Mopars.
User avatar
Matthew Keij
Posts: 1407
Joined: Tue Mar 09, 2004 3:37 pm
Location: Poortvliet, The Netherlands

Re: Dick's convertible project

Post by Matthew Keij »

Valance should be the same for all 59 Plymouths.

I might have a pretty good steering wheel if you are interested
July 14th 2019 “the soul crusher”
User avatar
Dick Koch
Posts: 2218
Joined: Sat Jan 21, 2006 4:03 pm
Location: Palm Beach Gardens, Fl.
Contact:

Re: Dick's convertible project

Post by Dick Koch »

I'll take a side by side picture and post it.
Dick
Life is Beautiful! Sex, Beer & Mopars.
User avatar
Dick Koch
Posts: 2218
Joined: Sat Jan 21, 2006 4:03 pm
Location: Palm Beach Gardens, Fl.
Contact:

Re: Dick's convertible project

Post by Dick Koch »

Top
--------------------------------------------------------------------------------

Report this postReply with quote Re: Getting a start on the convertible project
by rogerh » Thu Jan 13, 2011 3:35 pm

Yeah, I got a chuckle seeing the Sport Fury medallion next to the Belvedere script.
Some eyebrow stainless can be seen in the green plastic "recycle" crate.
Let's hope all the seat springs are there, however a person CAN cut down a hardtop rear seat backspring to fit, and swivel seats can still be found.
Interesting that it has bumper wings, but no rocker moldings or stone guards. Maybe there are more goodies to go with (rattlesnakes and black widow spiders not included). i don't see a valance.........
I am just stunned at how apparently rust-free, and dent-free it is. It appears as though it may have been one of those slow-motion restorations-in-progress...(someone had sanded on the paint).
We'll know more when Dick has it delivered.
Dick, you must have had the sweetest voice for you to talk the widow into choosing you over all other parties! Did she stick to the original Hemmings price?
Matthew, which letters do you see written on the hood?
rogerh

Posts: 2059
Joined: Fri Mar 19, 2004 7:30 am
Location: Silverdale, Wa.
Private messageE-mail rogerh
Life is Beautiful! Sex, Beer & Mopars.
User avatar
rogerh
Posts: 3024
Joined: Fri Mar 19, 2004 6:30 am
Location: Seabeck, Wa.

Re: Dick's convertible project

Post by rogerh »

matthew, thanks for relocating this thread.
Thanks for the added picture, Dick, showing the dashboard.
Matthew is correct, the valances are the same across the models. ( referring to the under-front-bumper air scoop.)
When John Quinn comes back in from his very long walk, and no longer has that blood in his eyes, he will tell you not to start calling it a Sport Fury (see reference in your comment on valance)...it is a True-Blue Belvedere convertible!
Last edited by rogerh on Thu Jan 13, 2011 3:15 pm, edited 1 time in total.
User avatar
Matthew Keij
Posts: 1407
Joined: Tue Mar 09, 2004 3:37 pm
Location: Poortvliet, The Netherlands

Re: Dick's convertible project

Post by Matthew Keij »

I didn't do anything Roger, it was all mister Koch.

Forgot, it has manual windows.
I got some great looking handles for those!!
July 14th 2019 “the soul crusher”
User avatar
Dick Koch
Posts: 2218
Joined: Sat Jan 21, 2006 4:03 pm
Location: Palm Beach Gardens, Fl.
Contact:

Re: Dick's convertible project

Post by Dick Koch »

Mr. Roger - I'll have you know I personally relocated this thread myself, so there!
Dick.
Life is Beautiful! Sex, Beer & Mopars.
User avatar
rogerh
Posts: 3024
Joined: Fri Mar 19, 2004 6:30 am
Location: Seabeck, Wa.

Re: Dick's convertible project

Post by rogerh »

Well then, you are even MORE AWESOME than I ever realised :D !
Car appears to have clear glass all around.
who wants to hazard a guess as to original color? (I say white, judging from what can be seen of the rear edge of passenger compartment)
User avatar
Dick Koch
Posts: 2218
Joined: Sat Jan 21, 2006 4:03 pm
Location: Palm Beach Gardens, Fl.
Contact:

Re: Dick's convertible project

Post by Dick Koch »

Roger - You may be right. I was thinking wiht the black and white upholstery material I have (picture later) white may be a good color.
Dick.
Life is Beautiful! Sex, Beer & Mopars.
User avatar
Matthew Keij
Posts: 1407
Joined: Tue Mar 09, 2004 3:37 pm
Location: Poortvliet, The Netherlands

Re: Dick's convertible project

Post by Matthew Keij »

White is a nice colour (got a white daily driver) but i think you need the inserts if you go with white.

Here is a pic for you Dick

53.jpg
July 14th 2019 “the soul crusher”
User avatar
rogerh
Posts: 3024
Joined: Fri Mar 19, 2004 6:30 am
Location: Seabeck, Wa.

Re: Dick's convertible project

Post by rogerh »

I am not going to say which color I prefer. I was just playng detective with the pictures provided.
I also will refrain from voicing my opinion on whether you should go strictly factory-original, or custom.
I don't have a book showing the Factory choices for Belvedere interior and exterior colors.
Plenty of time for you to choose which way to go. Will it be an investment, or a BigBoy Toy? :D
User avatar
Dick Koch
Posts: 2218
Joined: Sat Jan 21, 2006 4:03 pm
Location: Palm Beach Gardens, Fl.
Contact:

Re: Dick's convertible project

Post by Dick Koch »

Good Points Roger - I'll have to think about it.
Dick
Life is Beautiful! Sex, Beer & Mopars.
Post Reply