Ed Eckerson - Long Island, NY, USA

Post Reply
User avatar
Faulkner
Posts: 5031
Joined: Sun Mar 07, 2004 6:59 pm
Location: Upper Darby, PA
Contact:

Ed Eckerson - Long Island, NY, USA

Post by Faulkner »

Even before Ed bought the '59 Sport Fury he knew he would come to own - he rebuilt the Golden Commando he intended to place in it. This topic is documentation of Ed's meticulous craftmanship in accomplishing his goal.

1.jpg
The engine is a natural 'ML 361'. As far as I can tell, other than a valve job it was never apart. Being totally anal about this project I thought I would concentrate on the power train before actually getting a vehicle.
2.jpg
After a complete tear down and inspection I was so pleased to find everything standard size along with brackets and looms I never thought existed. I have acquired most of the new engine internals for the rebuild and have started 'preparing' the externals to go back together. It will be totally factory stock -- with factory plymouth golden commando colors -- along with the dual quad option. The only thing I am taking liberty with is the color of the bolt heads. There was just too much red on this engine!
3.jpg
4.jpg
5.jpg
6.jpg
I am pleased to say, that it will go back together with standard size main and rod bearings -- she was that well preserved. I expect to have her together and ready to start or install by next summer. I am taking my time and enjoying every little operation. Next spring I'll work my way back as I purchase a cast iron water cooled torqueflite to play with just waiting for the right body to come along.
7.jpg
Yes -- the gold bolt heads are incorrect -- but it came out so good!
8.jpg
Bare block right after teardown
9.jpg
Yes - colors are correct.
10.jpg
The loom on the intake I THINK was used on dual quads
11.jpg
Finished items ready for final assembly!
13.jpg
My attic is now complete with the 2 manifolds -- I now have all parts! ...and ready to assemble. In my opinion, the most elusive part! It is totally rebuilt, stripped, coated, new heat riser, new pins, new stainless heat tube. This was a fun item to rebuild.
14.jpg
You have no idea how hard this was to locate. If I told you what I paid for it and how much the parts and coating were total -- I'd be embarrassed!
15.jpg
16.jpg
The Short block is complete and assembled! All clearances came out exactly to plan--she really came out nicely!! Rods and mains are standard size with .0015 clearance, pistons will supply a stock 10/1 comp ratio at .003 piston to wall clearance. The ring end gap is .012 with plasma molly rings, a bit snug, but it's stock and should allow for no blowby at all.
18.jpg
19.jpg
20.jpg
21.jpg
I was able to paint the tops of all of the casting marks and numbers, along with the engine ID. Not exactly stock, but that is poetic license. I also went a little nutty on the bolt heads, but poetic license also.
22.jpg
23.jpg
24.jpg
25.jpg
26.jpg
27.jpg
The heads and manifold are just held in place by a few bolts. I decided not to totally assemble it because of the weight involved in moving it sooner or later. The carbs will be rebuilt when I find a host -- I did not want fresh carbs to sit dry if things extend for a while. All of the accessories are put away as there is minimal room where I am keeping it and no sense of hanging everything just to take it off again.
28.jpg
29.jpg
30.jpg
32.jpg
Ed-car012.jpg
Complete except for carb rebuild
Ed-car013.jpg
What makes this side interesting: 1) ULTRA RARE exhaust manifold with heat tube 2) WHAT A B**CH, but choke heat tube from manifold is correctly routed 3) Coil mounting bracket MOST RARE of all items! 4) Nice correct little red boot on #1 plug wire
Ed-car014.jpg
A close up of the detail work
90490021.JPG
Just a few recent pics of the 361 COMPLETE with rebuilt carbs and torqueflite --just waiting for 'BLACKIE' and FP31 in the background
51260002.JPG
This was a fun 1 year project---I did drag it out a bit but had fun with every bolt I turned.
33.jpg
90490024.JPG
"If it's new, Plymouth's got it!"
User avatar
Faulkner
Posts: 5031
Joined: Sun Mar 07, 2004 6:59 pm
Location: Upper Darby, PA
Contact:

Blackie

Post by Faulkner »

Ed's startling '59 Sport Fury restoration!

misc 066.jpg
Ed finds his dream car! It's had a 440 dropped into it, but other than that it is a diamond in the rough
misc 065.jpg
misc 074.jpg
misc 075.jpg
Original floor, NO RUST, LOVE IT
59SF.jpg
The interior's DONE - as good as I could do!
SF 59.jpg
Center arm rest and back seat and door side panels a bit faded but ORIGINAL! Check out the MirrorMatic...
1959 SF.jpg
Ready for the paint shop. She is going 'in' within 2 weeks -- Shop will do the exterior body, probably a repaint -- partially or fully -- do not know till they see her. The schedule for return is 1 to 5 months...
SF 1959.jpg
THE REAR END! My restoration--as good as I could do! SURE GRIP, 6 LEAF H/D suspension springs, 12" BRAKES, RESTORED TANK
ed 030.jpg
Some pics BEFORE engine and trans transplant!
more bell.jpg
ed 031.jpg
transmo.jpg
This one is just some silly detail on the trans. You cannot see it but the P/N of the trans is hi-lited in black
IMG_0240.JPG
Blackie gets the "star" treatment at Nostalgia Motors in Boonton, NJ
IMG_0241.JPG
IMG_0242.JPG
IMG_0243.JPG
IMG_0244.JPG
IMG_0246.JPG
100_1196.jpg
Getting ready to come home
home.jpg
Home again!
ed 025.jpg
ed 026.jpg
NOSTALGIA did the aerials and skirts and alum side trim with stainless -- I did all the rest of the externals.
ed 027.jpg
ed 028.jpg
Afbeelding 338.jpg
On July 9th, 2009, Ron and Matthew Keij, Andre Hakker and Dan Morton paid Ed a visit at his home in Long Island. The pictures that follow are from that visit with Ed and his exceptional car collection.
Enjoy this little video of poetry in motion!
Afbeelding 341.jpg
Afbeelding 342.jpg
DSCF0272.jpg
DSCF0275.jpg
DSCF0276.jpg
Back seat is ORIGINAL FABRIC--FADED BUT NOT TORN
DSCF0277.jpg
DSCF0278.jpg
DSCF0279.jpg
DSCF0259.jpg
DSCF0260.jpg
DSCF0261.jpg
DSCF0262.jpg
DSCF0280.jpg
DSCF0281.jpg
DSCF0282.jpg
DSCF0263.jpg
IMG_1105.jpg
Detailed? You betcha!
IMG_1106.jpg
Apologies for the duplicate pictures! Many cameras were clicking that day...
Afbeelding 354.jpg
Afbeelding 355.jpg
IMG_1107.jpg
DSCF0265.jpg
Original silencing fabric on bottom side of lid.
Afbeelding 370.jpg
Afbeelding 372.jpg
IMG_1108.jpg
For the fender skirt lovers among us!
DSCF0283.jpg
IMG_1109.jpg
Routing of the choke line is correct--it was a pain
IMG_1110.jpg
So sweet, to see Ed's meticulous rebuild united with this beautiful restoration
IMG_1111.jpg
Afbeelding 358.jpg
Afbeelding 359.jpg
Afbeelding 360.jpg
Afbeelding 361.jpg
Afbeelding 363.jpg
Afbeelding 364.jpg
DSCF0267.jpg
DSCF0268.jpg
DSCF0274.jpg
IMG_1112.jpg
IMG_1115.jpg
IMG_1104.jpg
DSCF0264.jpg
Afbeelding 349.jpg
Door panels have the 5/59 date stamp on the back side
DSCF0266.jpg
DSCF0269.jpg
Afbeelding 351.jpg
DSCF0271.jpg
Afbeelding 356.jpg
Clean as a whistle!
DSCF0285.jpg
IT WORKS
DSCF0286.jpg
Put there by original owner--in memory to him
DSCF0287.jpg
Afbeelding 350.jpg
Center arm rest is original fabric
IMG_1113.jpg
Afbeelding 352.jpg
DSCF0270.jpg
IMG_1114.jpg
IMG_1121.jpg
Afbeelding 369.jpg
Afbeelding 353.jpg
Afbeelding 368.jpg
IMG_1146.jpg
IMG_1147.jpg
DSCF0288.jpg
IMG_1116.jpg
Bolt-head madness!
IMG_1117.jpg
IMG_1124.jpg
The Trans pan looked much better in red (POETIC LICENSE)
Afbeelding 366.jpg
Correct rear muffler brackets and hangars---weird set up
Afbeelding 367.jpg
Afbeelding 376.jpg
IMG_1137.jpg
IMG_1118.jpg
IMG_1119.jpg
Exterior prep and paint done by these folks...
IMG_1120.jpg
IMG_1122.jpg
IMG_1123.jpg
Afbeelding 343.jpg
Afbeelding 344.jpg
Afbeelding 345.jpg
Afbeelding 346.jpg
Afbeelding 347.jpg
Afbeelding 348.jpg
Afbeelding 357.jpg
Afbeelding 362.jpg
Afbeelding 365.jpg
Afbeelding 374.jpg
Afbeelding 375.jpg
Matthew caught Ed with two heads in the bumper reflection!

My sentiments before painting!! (TO PAINT OR NOT TO PAINT)
Afbeelding 377.jpg
Afbeelding 378.jpg
Afbeelding 379.jpg
Afbeelding 380.jpg
IMG_1138.jpg
IMG_1139.jpg
Afbeelding 397.jpg
Afbeelding 398.jpg
Afbeelding 381.jpg
Afbeelding 387.jpg
Afbeelding 339.jpg
Ed's prized '57 Fury
Afbeelding 340.jpg
My 57 started the madness
IMG_1130.jpg
Afbeelding 388.jpg
Afbeelding 389.jpg
IMG_1131.jpg
IMG_1132.jpg
Afbeelding 392.jpg
IMG_1133.jpg
Afbeelding 391.jpg
IMG_1134.jpg
IMG_1135.jpg
Afbeelding 382.jpg
Afbeelding 390.jpg
Afbeelding 393.jpg
Afbeelding 394.jpg
Afbeelding 395.jpg
Afbeelding 396.jpg
DSCF0297.jpg
Truth be known -- Ed is a Chebbie Lover too! He says...

A MOPAR LOVER WITH A CHEBBIE--NOT a Chebbie lover with Mopars
IMG_1143.jpg
Afbeelding 403.jpg
Afbeelding 401.jpg
280 HP 348 'STUMP PULLER'--amazing bottom end torque
Afbeelding 402.jpg
Afbeelding 406.jpg
DSCF0298.jpg
IMG_1145.jpg
"Gr" for "Grade"!

Equipped with the original, rare, hated, unpopular, no shift, TURBOGLIDE. A very trouble-prone trans, this one smooth as silk and EXTREMELY RARE
Afbeelding 407.jpg
Afbeelding 408.jpg
Afbeelding 409.jpg
Afbeelding 412.jpg
Afbeelding 413.jpg
IMG_1142.jpg
DSCF0293.jpg
DSCF0295.jpg
51260013.JPG
Says Ed: SHE started this INSANITY!
"If it's new, Plymouth's got it!"
Post Reply